RIVER ROK COLOR COMBINATIONS

• Harbor Gray -   8 Granite + 2 Emerald Black
• Blue Opal     -   8 Lucayan Blue + 2 Emerald Black
• Baha Sand   -   6 Lucayan Blue + 4 Emerald Black
• Lagoon         -   6 Calm Sea + 2 Emerald Black + 2 Granite
• Aspen Mist   -   1 Calm Sea + 9 Imperial White 
• Pacific Pearl -   1 Pebble Beach + 9 Imperial White

Fill and Balancing Quick Reference:

In accordance with the National Plasterers Council, Inc. (NPC) standards, it is recommended that the following pool and spa water chemistry conditions be maintained on an ongoing basis for the longevity of the River Rok pool and spa finish. These values are important to prevent corrosion, deterioration, discoloration, scaling or other problems. Follow recommended fill and balancing procedures to ensure a successful start-up. Fill pool completely and without interruption with clean, potable water. The use of a filter during fill is strongly recommended.

DO NOT ADD CHLORINE OR CALCIUM CHLORIDE.

Brush entire surface twice daily for the first three (3) days

First Day: Add sequestering agent upon initial fill per manufacturer’s instructions and maintain water circulation for 24 Hours prior to balancing pool chemistry. Adjust pH to 7.2 - 7.6 and total alkalinity to 80 - 120 PPM.

Second Day: Record pH, total alkalinity, calcium hardness and temperature levels. Adjust pH to 7.4 - 7.6 and total alkalinity to 80 - 120 PPM. Dissolve all chemicals completely in water before adding to pool, and allow sufficient time for each chemical to be fully dispersed before adding other chemicals.

Third Day: Repeat steps from Second Day. Adjust chemistry to the following levels

Free Chlorine              1.0 - 3.0 PM

pH:                              7.4 - 7.6 

Total Alkalinity:            80 - 120 PPM

Calcium Hardness:     200 - 400 PPM

Stabilizer:                    30 - 60 PPM